Excellent Colour images, Security Camera suitable for Outdoors, Indoors & average to High illumination levels.

Designed for monitoring & recording a wide range of CS Mount Lenses are available providing Tight 1.3 m wide shots @ 15 m & Wide 27+ m shots @ 15 m.

Suitable for Outdoors, Indoors, Showrooms, Offices, Warehouses, Homes, Factories, etc.

Use out-of-the-box or tailor settings to cope with difficult lighting using On-Screen-Display and push-buttons on rear of Camera.

Order Code: [Pixim-CS] $129
$89 < 20 + >

Accessories
[REG12/1A] Security Camera Plug Pack $20
[BRKT-221] Swivel Mounting Bracket $8
6, 8 or 16  mm C Mount Fixed Iris Lens $25
[Cable-VP] Plug-In 20 m Security Camera Cable $30
Security Camera Microphone $20
[Rect-Reg+] Rectifier Regulator for long cable run, 24 vac power, etc

an all-in-one see-in-the-Dark Seawolf Camera

 
CS Mount Security Camera with Progressive Scan DPS Imaging technology that resolves many of the shortcomings of conventional CCD and CMOS sensors, this Pixim Seawolf Chip solution is excellent for most common and many difficult Security Surveillance applications. When fitted with an Automatic Iris Lens it will cope with high illumination levels and have greater depth-of-field.

Specifically designed for surveillance in domestic and commercial situations this Security Camera can be easily added to an existing Security Recording system (or replace an under performing CCD Camera), simply fit a Lens and connect Video Output from Camera to an unused Security DVR Video input.

This Security Camera can be easily connected to the Composite Video Input (AV, Yellow RCA socket) on most TVs and Domestic or commercial Recording Devices, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more metres.

Powered by Pixim's 'Seawolf Solution' this Security Camera has an extraordinary 690 HTVL effective resolution, this is far better than conventional Security Cameras, HTVL Effective Specification.

Image Device: Progressive-Scan Seawolf Solution (768x548 Pixels) 758(H) 540(V) 409 320 Active Pixels ⅓" format 7 µm x 7 µm pixel size, CMY Colour Array PIXIM® Wide Dynamic Digital Pixel System®

Lens: C or CS Mount, Lens is NOT INCLUDED with this Camera, compatible lenses are: C Mount (with C-Spacer), CS Mount, Fixed, Manual Iris & Auto Iris 1/3" & 1/2" types on this page, EXCEPT CC40, security camera lens information.

Video System: 2:1 Interlace switchable between PAL 50/625 or NTSC 60/525. PAL 50 Hz vertical, 15 625 Hz horizontal. Compatible with TV Systems in Australia, NZ, UK, USA, Japan, etc.

Video Output: Composite Video 75 ohms 1.14 V p-p, BNC socket, suitable for TV, DVR, VCR, AV & Video inputs in Australia, NZ, UK, USA, Japan, etc.

Sensor/DSP HTVL-effective Resolution: 690 HTVL-E better than Super-VHS near SDTV/DVD resolution. Pixim Whitepapers: HTVL Effective Specification & Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems

Horizontal Resolution: 540 HTVL, this value is provided for comparative purposes only.

Vertical Resolution: 460 VTVL, this value is provided for comparative purposes only, significantly better than conventional interlaced CCD sensors.

Sensitivity: ~ 0.1 Lux @ F1.2, 50 IRE, 25 fps, CMY, this value is provided for comparative purposes only.

Automatic Electronic Shutter (AES): 1/25 to 1/30 720 second.

Dynamic Range (more): 102 dB typically, 120 dB maximum, Dynamic Range is illustrated on this page.

Smear (more): Zero for most practical purposes, copes with highlights better than ordinary CCD cameras, Smear is illustrated on this page.

Signal to Noise ratio (SNR): up to 50 dB, measured with AGC off.

Back Light Compensation (BLC): Automatic, On/Off.

Noise Reduction: 3D, Motion Adaptive.

Flicker Reduction: 'Pixim' Enhanced Flicker Reduction.

Gamma: 0.45.

On-Screen-Display Setup: All menu functions and parameters are easily set via Up/Down/Left/Right/Enter push button on back of Camera.

Main Menu: Due to ongoing product development all or some of the functions listed may not be available with this Camera.

"WDR Mode" Normal, Indoor, Outdoor, Fluro 1, Fluro 2.

"Exposure" Gain Mode: AGC Low, Medium, High, Custom Bias 37 increments Limit 61 increments, Manual 102 increments, Slow Shutter 2X to 32X, 5 increments. WD Range: Auto, Manual 10 increments. Backlight Zone: On 21 x 14 positions, Off. Transitions: Normal, Fast, Slow.

"White Balance" Mode: ATW Extend, ATW Normal, ATW Desat, AWB, Manual Colour-Temp 2000~11000ºK 90 increments, Red & Blue 40 increments. Magenta Ctrl: On, Off, Custom 100 increments. WB Bias: 40 increments. Transitions: ATW Slew 100 increments. Hysteresis 100 increments.

"Viewing" Horizontal-Mirror: On, Off. Gamma Mode: Auto, Off, Manual 75 increments. Sharpness: Detail Boost Auto, Off. Noise Reduction On, Off. Sharpness 16 increments. Aperture 16 increments. Chroma: Bias: 16 increments. Resolution: Normal 1, Advanced 1, Normal 2, Advanced 2.

"Setup" Video I/O: TV System PAL, NTSC. Video Level 8 increments. Colour Bars On, Off. Synchronisation Int, Int2, Line-Lock 625 increments. ID Setup: On, Off. Characters 8. Position Up-left, Up-center, Up-right, Down-left, Down-right. Day Night Setup: D/N Ctrl *Auto, Colour, Mono. Gain Boost On, Off. AI Threshold: 102 increments.

"Save/Restore" Restore User Settings, Save User Settings, Restore Factory Settings, Reset Camera.

Power Requirements: 12 Volts DC Regulated, ~ 150 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+).

Dimensions (mm): ~  70 x 56 x 136.

Mass: ~  450 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.